EMI Filtered Connectors from performance to board space, to cost, we offer many reasons and options for managing EMI @ the signal & power I/O Series F Ferrite Filtered Connectors offer a low cost, space saving solution for high frequency interference... FC3-FC7 Series 500 Low-Profile Feed-Through Connectors deliver reliable EMI filtering in 90 PCB and straight PCB connectors... FC8-FC11 Series 600 Hi-Density Filtered Connectors meet the growing need for increased circuit densities in smaller packages... FC12-FC13 Series 700 High Performance Connectors feature feedthrough capacitive and Pi filters for the most effective filtering... FC16-FC37 Filtered Combo D-Sub Connectors use tubular capacitors for high insertion loss in signal, power and coaxial contacts... FC38-FC48 Micro D Series Connectors allow designers to incorporate EMI filtering into even smaller packages... FC49-FC53 Datacom Connectors including modular jack, miniature ribbon and mini-DIN protect critical datacom lines... FC54-FC57 Hooded Strain Reliefs for shock protection from exposed wires and short circuits... FC60 Performance Specifications & Board/Panel Cutouts... FC62-FC64 Advantages of a Filtered Connector Low ground impedance - Full ground plate and metallic shell provide minimal impedance and superior performance compared to on-board filter with high impedance Eliminate re-radiation - Filtered connector at interface leaves no path for bypassing the filter Ground plane shielding - API's filtered connector ground planes shield the box even at the connector port Efficient space utilization - Filters located in the connectors provide additional space on PCB board Consistent performance - Filtered connectors provide more consistent pin to pin performance Fewer components - Filtered connectors reduce component count creating cost savings Reliability - API tests 100% of filters, on-board filters are usually spot tested API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC1 Advantages of API Filtered Connectors API Technologies' Spectrum Control brand offers the industry's most complete line of filtered D-subminiature connectors. Our connectors are available in shell sizes from 9 to 50, and come in many termination types, such as PC mount, wire wrap, solder cup and 90 PCB. In addition, API offers a wide range of filtering options, allowing you to find the right balance between performance and economy. D-Subminiature Connectors EMI filter options include our Pi filter configuration, which provides 45-60 dB per decade slope to insertion loss curve, our capacitive-only C filters that provide cost-effective EMI attenuation, ferrite filtered series F connectors (designed for filtering in situations that do not tolerate capacitive loading of circuit), as well as our series 500 connectors, with small .318" footprints. The construction of our high performance Series 600 and 700 connectors features a one-piece zinc diecast shell, which is subsequently nickel-plated. Each filter is constructed with 360 grounding with ground plate, and our patented coaxial springs ensure ground continuity. And with API's advanced in-house ceramic tube design, you'll get a reliable, high performance filter from start to finish. Low ground impedance - Full ground plate and metallic shell provide minimal impedance and superior performance compared to on-board filter with high impedance Eliminate re-radiation - Filtered connector at interface leaves no path for bypassing the filter Ground plane shielding - API filtered connector ground planes shield the box even at the connector port Efficient space utilization - Filters located in connector provides additional space on PCB board Consistent performance - Filtered connectors provide more consistent pin to pin performance Fewer components - Filtered connectors reduce component count creating cost savings Reliability - API tests 100% of filters, on-board filters are usually spot tested Advantages of an API Filtered Connector On-Board Filters API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC2 Series F Ferrite Filtered Connectors The Series F filtered D-subminiature connectors incorporate a solid slab of ferrite material as the filtering element. This rugged one-piece design provides a com-pact connector that is a drop-in replacement for standard connectors. The ferrite material has been chosen for optimum filtering performance in the 10 to 300 MHz range. Series F Applications Personal computers, microcomputer-applied products and peripheral/terminal equipment Eliminates common-mode noise along data lines in data communication terminals and digital equipment Features Low cost, high performance ferrite filter No distortion of wave forms Replaces individual ferrite bead filters, saving cost and space Provides both pin to ground and pin to pin filtering Effective in helping meet requirements of FCC, VDE, EN55022 and Japan's VCCI Short, space saving .318" footprint Interchangeable with standard D-subminiature connectors Can be installed directly over PCB trace pattern with no shorting 4-40 UNC locking insert eliminates loose hardware Metal shielding front shell Gold plated contacts RoHS compliant versions available (replace 56- with 56F) Impedance (ohms) 100 50 Right Angle 25 10 Vertical Angle 5 1 5 10 Frequency (MHz) 25 50 100 Mechanical Specifications Front Shell. . . . . . . . Steel (Tin plated) Housing . . . . . . . . . UL 94V-0 Rated thermoplastic, black Contacts . . . . . . . . . Phosphor bronze (sockets) . . . . . . . . . . . . . . . . or brass (pins) Contact Plating . . . . . . . . . . Gold Flash (<10 in.) over nickel Operating Temperature. . . . . . . -40C to +105C Electrical Specifications Frequency (MHz) 1 10 30 50 100 Impedance (Ohms) Right Angle 2 15 20 23 27 Vertical 1 6 10 12 15 Frequency Range . . . . . . . . . . . 10 - 300 MHz Current Rating . . . . . . . . . . . 5 Amps Dielectric Withstand Voltage . . 1000 VAC for one minute Insulation Resistance . . . . . . . . 1000 megohms Min. @ 500VDC API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC3 Series F Ferrite Filtered Connectors Pin Contact - Right Angle Mount Part Number Typ. Impedance (Ohms) Frequency Description 30 MHz 100 MHz Range 56-402-001 D-Sub 9 pin 56-412-001 D-Sub 15 pin 56-422-001 D-Sub 25 pin 10 MHz 20 27 to 300 MHz A+/0.010 (0.25) B +/0.005 (0.13) C +/0.015 (0.38) D +/0.010 (0.25) E +/0.015 (0.38) F +/0.005 (0.13) G +/0.004 (0.10) H +/0.005 (0.13) I +/0.005 (0.13) J +/0.005 (0.13) 0.666 (16.92) 0.984 (25.00) 1.213 (30.81) 0.318 (8.08) 0.751 (19.10) 0.324 (8.22) 0.108 (2.74) 0.984 (25.00) 0.432 (10.98) 0.606 (15.40) 0.994 (25.25) 1.312 (33.32) 1.541 (39.14) 0.318 (8.08) 0.751 (19.10) 0.648 (16.46) 0.108 (2.74) 1.312 (33.32) 0.756 (19.20) 0.929 (23.60) 1.534 (38.96) 1.852 (47.04) 2.088 (53.04) 0.318 (8.08) 0.751 (19.10) 1.196 (30.36) 0.110 (2.76) 1.852 (47.04) 1.304 (31.12) 1.476 (37.50) Also available through API's authorized European distributors/agents. Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC4 *High-Density Series F Ferrite Filtered Connectors .350 (8.89) SCI Part Number and Date Code .100 (2.54) Typ. .494 .010 (12.55 0.25) .138 .010 (3.50 0.25) Socket Contact - Right Angle Mount .984 (24.99) .045 (1.14) Typ. .125 .003 Dia. (3.18 0.08) .004 (0.10) 2 Holes .277 (7.04) Posn. No. Ref. Typ. .100 (2.54) 15 6 5 1 2 .090 (2.29) Typ. .047 .002 Dia. (1.19 0.05) .006 (0.15) 15 Holes .100 (2.54) PC Board Mounting Dimensions Part Number 56-404-001 56-414-001 56-424-001 56-414-001-HD Description Typ. Impedance (Ohms) Frequency 30 MHz 100 MHz Range D-Sub 9 socket D-Sub 15 socket D-Sub 25 socket Hi-Density 15 socket 20 27 10 MHz to 300 MHz 16 26 A+/0.010 (0.25) B +/0.005 (0.13) C +/0.015 (0.38) D +/0.010 (0.25) E +/0.015 (0.38) F +/0.005 (0.13) G +/0.004 (0.10) H +/0.005 (0.13) I +/0.005 (0.13) J +/0.005 (0.13) 0.643 (16.33) 0.984 (25.00) 1.213 (30.81) 0.318 (8.08) 0.755 (19.20) 0.324 (8.22) 0.108 (2.74) 0.984 (25.00) 0.432 (10.98) 0.606 (15.40) 0.971 (24.66) 1.312 (33.32) 1.541 (39.14) 0.318 (8.08) 0.755 (19.20) 0.648 (16.46) 0.108 (2.74) 1.312 (33.32) 0.756 (19.20) 0.929 (23.60) 1.511 (38.38) 1.852 (47.04) 2.088 (53.04) 0.318 (8.08) 0.755 (19.20) 1.196 (30.36) 0.110 (2.76) 1.852 (47.04) 1.304 (31.12) 1.476 (37.50) 0.643 (16.33) 0.984 (25.00) 1.213 (30.81) Also available through API's authorized European distributors/agents. * See inset drawing Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC5 Series F Ferrite Filtered Connectors Pin Contact - Vertical Mount Part Number Typ. Impedance (Ohms) Frequency Description 30 MHz 100 MHz Range 56-407-001 D-Sub 9 pin 56-417-001 D-Sub 15 pin 56-427-001 D-Sub 25 pin 10 MHz 10 15 to 300 MHz A+/0.010 (0.25) B +/0.005 (0.13) C +/0.015 (0.38) D +/0.010 (0.25) E +/0.015 (0.38) F +/0.005 (0.13) G +/0.004 (0.10) H +/0.005 (0.13) I +/0.005 (0.13) 0.666 (16.92) 0.984 (25.00) 1.213 (30.81) 0.236 (5.99) 0.468 (11.88) 0.324 (8.22) 0.108 (2.74) 0.984 (25.00) 0.432 (10.98) .994 (25.25) 1.312 (33.32) 1.541 (39.14) 0.236 (5.99) 0.468 (11.88) 0.648 (16.46) 0.108 (2.74) 1.312 (33.32) 0.756 (19.20) 1.534 (38.96) 1.852 (47.04) 2.088 (53.04) 0.236 (5.99) 0.468 (11.88) 1.196 (30.36) 0.110 (2.76) 1.852 (47.04) 1.304 (31.12) Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC6 Series F Ferrite Filtered Connectors Socket Contact - Vertical Mount Part Number Typ. Impedance (Ohms) Frequency Description 30 MHz 100 MHz Range 56-403-001 D-Sub 9 socket 56-413-001 D-Sub 15 socket 56-423-001 D-Sub 25 socket 10 MHz 10 15 to 300 MHz A+/0.010 (0.25) B +/0.005 (0.13) C +/0.015 (0.38) D +/0.010 (0.25) E +/0.015 (0.38) F +/0.005 (0.13) G +/0.004 (0.10) H +/0.005 (0.13) I +/0.005 (0.13) 0.643 (16.33) 0.984 (25.00) 1.213 (30.81) 0.236 (5.99) 0.472 (11.98) 0.324 (8.22) 0.108 (2.74) 0.984 (25.00) 0.432 (10.98) .971 (24.66) 1.312 (33.32) 1.541 (39.14) 0.236 (5.99) 0.472 (11.98) 0.648 (16.46) 0.108 (2.74) 1.312 (33.32) 0.756 (19.20) 1.511 (38.38) 1.852 (47.04) 2.088 (53.04) 0.236 (5.99) 0.472 (11.98) 1.196 (30.36) 0.110 (2.76) 1.852 (47.04) 1.304 (31.12) Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC7 Series 500 Low Profile Filtered Connectors API's Spectrum Control brand of Series 500 are cost effective, highly reliable EMI filtered D-subminiature connectors that feature a .318" footprint for 90 degree PCB connectors and a low profile housing on straight PCB connectors. Series 500 filtered D-subs are "drop-in" replacements for standard unfiltered D-sub connectors. The ability of these connectors to achieve EMI filtering within the smaller footprint is the result of technical advances in ceramic capacitors. Series 500 connectors use tubular capacitors for high performance EMI filtering. Quality features for these connectors include board lock mounting, metal front shells and gold plated contacts. Series 500 capacitive filtered D-sub connectors are an ideal solution to FCC/EC/VCCI emissions problems. These connectors are designed to protect equipment from external EMI noise and eliminate system glitches. Series 500 Applications Features "Drop-in" replacements for unfiltered D-subminiatures Compact design, featuring .318" footprint Tubular feed-through capacitors provide filtering superior to on-board components Ground plane design provides EMI shielding Full interchangeability; based on MIL-C-24308 Each connector position is tested 100% for critical electrical parameters to ensure consistent performance Insulators are UL recognized UL94-V0 flammability rated 9, 15 and 25 shell sizes Available with board lock feature and 4-40 mounting threads Personal computers Industrial process equipment Graphics workstations PBX telecommunications equipment Selective filtering available Cellular base stations and medical electronics UL/CSA approved Greater than 40 dB filtering up through 1 GHz without resonances Bi-directional control of EMI at the I/O ports Rear insulator Front insulator Pin terminal Right angle termination 4-40 threaded insert Ground plane Tubular capacitor Metal front shell Board lock Lead spacer API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC8 Series 500 Low Profile Filtered Connectors Mechanical Specifications Shell . . . . . . . . . . . . Steel, tin plated Insulators . . . . . . . . Glass-filled polyester, . . . . . . . . . . . . . . . . flammability UL94V-O Operating Temperature. . . . . . . -40C to +125C Capacitors . . . . . . . . Proprietary barium titanate . . . . . . . . . . . . . . . . ceramic formulations Other environmental tests such as shock, vibration, humidity, etc. are performed as detailed in our filtered connector performance specifications on page FC81. Electrical Specifications 40 F 150 0p Ground Plane. . . . . . . . . . . . Phosphor bronze, nickel plated 50 30 20 1000 pF 10 0 1MHz 10MHz pF . . . . . . . . . . . . . *Heavier gold plating available upon request. Typical Insertion Loss F 0p 44 120 Socket Contacts . . . . . . . . . Copper alloy CA725, . . . . . . . . . . . . . . . . 30 microinch (0.76 m) gold plated* . . . . . . . . . . . . . . . . over nickel 60 Insertion Loss (dB) Pin Contacts . . . . . . Copper alloy CA725, . . . . . . . . . . . . . . . . 15 microinch (0.38 m) gold plated* . . . . . . . . . . . . . . . . over nickel 100MHz Frequency 840 pF is typically within 2 dB of 1000 pF curve. RF Current Rating . . . . . . . . . . . 0.3 Amps Filter Performance Capacitance . . . . . . . 120, 440, 840, 1000, . . . . . . . . . . . . . . . . 1500 pF 30% 5GHz Above curves represent application of proper grounding fundamentals. For assistance consult API. Current Rating . . . . . . . . . . . 5 Amps Contact Resistance . . . . . . . . 10 milliohms maximum 1GHz Cap. (pF) Value 30% 3 dB Insertion Loss (dB) Cut-off Freq. 20 100 500 1 2 (MHz) MHz MHz MHz GHz GHz 5 GHz Working Voltage . . . . . . . . . . 100 VDC 120 40 - 4 21 26 26 20 Dielectric Withstanding Voltage . . . . . . . . . . 300 VDC 440 11 3 15 27 33 32 25 840 6 6 19 32 38 37 25 1000 3 8 21 35 41 38 25 1500 2 10 25 40 47 42 25 Insulation Resistance . . . . . . . . 1 Gohm minimum UL Recognized. . . . . Under category of communication . . . . . . . . . . . . . . . . circuit accessories, . . . . . . . . . . . . . . . . File #E149046 Insertion loss measured per MIL-STD-220, no load, 50 ohm source and load. Above data represents guaranteed minimum. API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC9 Series 500 Low Profile Filtered Connectors Straight PC Mount Straight PC Mount Pin Contact (plug) Socket Contact (receptacle) E 1 E A C .329 (8.36) .050 (1.27) A C .025 (.64) sq. .312 (7.92) 1 .230 (5.84) .375 (9.53) .243 (6.17) .120.005 (3.05.13) dia. holes or optional #4-40 UNC .150 (3.81) .243 (6.17) B .243 (6.17) .120.005 (3.05.13) dia. holes or optional #4-40 UNC E D A C .483 (12.27) .329 (8.36) A C .050 .375 (1.27) (9.53) .312 (7.92) 1 .230 (5.84) B .105 (2.67) .120.005 (3.05.13) dia. holes or optional #4-40 UNC 9 15 25 B .050 .375 (1.27) (9.53) .494 (12.55) .494 (12.55) A .150 (3.81) E D .483 (12.27) Size .375 (9.53) 90 PC Mount 90 PC Mount 1 .025 (.64) sq. .494 (12.55) .494 (12.55) B .050 (1.27) .025 (.64) sq. .243 (6.17) C D .430 (10.92) .318 (8.08) E 1.213 (30.81) 0.984 0.666 (24.99) (16.92) 0.540 0.748 (13.72) (19.00) 1.541 (39.14) 1.312 0.994 (33.32) (25.25) 0.867 1.076 (22.02) (27.33) 2.088 (53.04) 1.852 1.534 (47.04) (38.96) 1.412 1.616 (35.86) (41.05) Standard Tolerance = .015 (0.38) .243 (6.17) B .105 (2.67) .120.005 (3.05.13) dia. holes or optional #4-40 UNC Size 9 15 25 A .025 (.64) sq. .243 (6.17) .430 (10.92) B C D .318 (8.08) E 1.213 (30.81) 0.984 0.642 (24.99) (16.31) 0.540 0.748 (13.72) (19.00) 1.541 (39.14) 1.312 0.970 (33.32) (24.64) 0.867 1.076 (22.02) (27.33) 2.088 (53.04) 1.852 1.510 (47.04) (38.35) 1.412 1.616 (35.86) (41.05) Standard Tolerance = .015 (0.38) Dimensions in inches (mm) Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC10 Series 500 Low Profile Filtered Connectors Ordering Information Example: 56-524-013-GBL 56 - 5 2 4 - Series 500 Connectors Filtered D-sub Connectors 013 - This part number represents a Series 500 filtered D-sub connector with 25 contacts, socket to 90 PCB mount configuration. The filter has a capacitance value of 1000 pF and the connector includes a grounded board lock. GBL For special needs or combinations of features, contact API engineering. Contact Type/Termination Shell Size/ Number of Contacts 2 - Pin to 90 PCB mount 3 - Socket to straight PCB mount 0 - 9 size 4 - Socket to 90 PCB mount 1 - 15 size 7 - Pin to straight PCB mount 2 - 25 size - - Standard connector F - RoHS compliant version Mounting or Hardware Options TI - 4-40 threads on mounting flange (.120" (3.05mm) hole if not selected) Capacitance Value 010 - 120 pF GBL - Grounded board lock, includes 4-40 threads (available only on 90 PCB) 011 - 440 pF 012 - 840 pF 013 - 1000 pF GBLF - Grounded board lock and ferrite slab, provides the enhanced performance of an (LC) filter (available only on 90 PCB) 014 - 1500 pF GBL Option Features Snap-in retention to PC board, requires no hardware #4-40 UNC-2B 2 holes Fits .125 (3.18) diameter hole .105 (2.67) .025 (.64) sq. .318 (8.08) Ensures low ground impedance for superior filtering 4-40 threads on mounting flange eliminate loose hardware .374 (9.50) Dimensions in inches (mm) Board Layout Typical Layout for .318" (8.08) Footprint B .109 (2.77) .375 (9.53) .054 (1.37) D C A Board edge .040 (1.02) .112 (2.84) .056 (1.42) .125 (3.18) Shell Size A B C D 9 .984 (24.99) .436 = 4 x .109 (11.07 = 4 x 2.77) .327 = 3 x .109 (8.31 = 3 x 2.77) .492 (12.50) 15 1.312 (33.32) .763 = 7 x .109 (19.38 = 7 x 2.77) .654 = 6 x .109 (16.61 = 6 x 2.77) .656 (16.66) 25 1.852 (47.04) 1.308 = 12 x .109 (33.22 = 12 x 2.77) 1.199 = 11 x .109 (30.45 = 11 x 2.77) .926 (23.52) Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC11 Typical Insertion Loss 80 Series 600 High-Density Filtered Connectors 70 Capacitive Filter Insertion Loss (dB) 60 50 The miniaturization of electronic systems and sub-systems is pushing designers to increase circuit densities within smaller packages. To address this growing need, API Technologies' Spectrum Control brand has developed a line of filtered High-Density D-subminiature connectors. This new line of connectors incorporates the high performance and reliable filtering of API's standard D-subs in the High-Density format. 30 18 20 10 0 16 15 10MHz 1MHz 100MHz Frequency 1GHz 5GHz Above curves represent application of proper grounding fundamentals, for assistance consult with Spectrum Control. Features Connectors designed to MIL-C-24308 Capacitance values from 85 pF to 4000 pF Filter type feed-through C Selectively specify and filter each contact position Available in feed-through capacitive configurations Mechanical Specifications: Same as Series 700 connectors, page FC21. 19 40 Insertion loss measured per MIL-STD-220, no load, 50 ohm source and load. Electrical Specifications Current Rating . . . . 3 Amps RF Current Rating. . 0.3 Amps Contact Resistance . . 15 milliohms maximum UL Recognized. . . . . Under category of communication . . . . . . . . . . . . . . . . circuit accessories, File #E149046 Electrical Specifications: High-Density Connectors Filter Designations Capacitance Filter Circuits Value Tol. 3 dB Cut-off Frequency Max. (MHz) Dielectric Working WithVoltage DC 5 standing -55C to MHz Voltage +125C 10 MHz Minimum Insertion Loss - Decibels (dB) 20 MHz 50 MHz 100 MHz 200 MHz 500 MHz 1 GHz 2 GHz 5 GHz 15 85 pF 25% 60 300V 100V -- -- -- -- 1 6 16 21 22 20 16 180 pF 25% 28 300V 100V -- -- -- 1 8 10 18 25 26 24 18 1000 pF 25% 5.1 300V 100V -- 3 8 14 20 25 32 35 41 39 19 4000 pF 25% 1.3 300V 100V 8 13 19 26 31 37 45 48 52 47 C Filter designation "G" for grounded contacts, "I" for insulated (not filtered) contacts. Filter designation "O" for omitted contact and no hole in ground plane. Ordering Information Example: 56-605-015-LI 56 - D-Sub Connector 6 0 5 - 0 15 Shell Size** 0 = 15 1 = 26 2 = 44 3 = 62 4 = 78 - Standard connector F - RoHS compliant version Hi-Density - LI Above data represents guaranteed minimum. This part number represents a Series 600 Hi-Density filtered D-Sub connector with 15 contacts, pin-socket adapter configuration. The FT filters have a capacitance value of 85 pF and the connector includes 4-40 locking inserts. Contact/Termination Special Filter Designation 1 - Pin to solder cup 0 = All 15 - 85 pF FT 2 - Pin to 90 PCB mount* positions 16 - 180 pF FT 3 - Socket to PCB mount same 18 - 1,000 pF FT 4 - Socket to 90 PCB* 9 = Special 19 - 4,000 pF FT mount loading 20 - Insulated contact 5 - Pin-socket adapter ** Some shell sizes require minimum order quantity. 7 - Pin to PCB mount Consult API for details. Options LI = 4-40 inserts S = Solder dip tails 50G = gold GBL = Grounding board lock * Required on right angle parts Note: VGA adapters also available. Consult factory API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC12 Series 600 High-Density Filtered Connectors Pin/Socket Adapter Size A B C D E F G 15 1.213 (30.81) .984 (24.99) .640 (16.26) .304 (7.72) .505 (12.83) .666 (16.92) .333 (8.46) 26 1.541 (39.14) 1.312 (33.32) .968 (24.59) .304 (7.72) .505 (12.83) .994 (25.25) .333 (8.46) 44 2.088 (53.04) 1.852 (47.04) 1.508 (38.30) .304 (7.72) .505 (12.83) 1.534 (38.96) .333 (8.46) 62 2.729 (69.32) 2.500 (63.50) 2.156 (54.76) .304 (7.72) .505 (12.83) 2.182 (55.42) .333 (8.46) 78 2.635 (66.93) 2.406 (61.11) 2.062 (52.37) .416 (10.57) .615 (15.62) 2.079 (52.81) .420 (11.18) A C 1 E D .050 (1.27) .243 (6.17) Socket End B .238 (6.05) Socket 10 Pin F 1 1.000 (25.40) G .153.005 (3.89.13) dia. holes Pin End 78 size has 4 rows of contacts Pin or Socket to Solder Cup, PCB Mount and 90 PCB Mount Size A B C D E F G 15 1.213 (30.81) .984 (24.99) .505 (12.83) .666 (16.92) .333 (8.46) .757 (19.23) .420 (10.67) A 10 10 D F 1 1 E C Mating Face B 26 1.541 (39.14) 1.312 (33.32) .505 (12.83) .994 (25.25) .333 (8.46) 1.085 (27.56) .420 (10.67) 44 2.088 (53.04) 1.852 (47.04) .505 (12.83) 1.534 (38.96) .333 (8.46) 1.625 (41.28) .420 (10.67) 62 2.729 (69.32) 2.500 (63.50) .505 (12.83) 2.182 (55.42) .333 (8.46) 2.273 (57.73) .420 (10.67) 78 2.635 (66.93) 2.406 (61.11) .615 (15.62) 2.079 (52.81) .440 (11.18) 2.170 (55.12) .527 (13.39) .120.005 (3.05.13) dia. holes Solder Cup .045 (1.14 ) .050 O.D. .026 (.66) (1.27) Min. I.D. .243 (6.17) P.C. Tail .025 (.64) dia. .050 (1.27) .238 (6.05) G .450 (11.43) Termination End .050 Boardlock (1.27) Centerline .243 (o.125 (6.17) thru x2) .660 (16.76) .400 (10.16) .125 (3.18) .358 (9.09) Solder Cup .150 (3.81) .125.020 (3.18.508) .100 (2.54) o.030 (.77) .350 (8.89) 90 PCB Mount .100 (2.54) .350 (8.89) .030 (7.62) Rd. .100 (2.54) .100 (2.54) 90 PCB Mount 78 line HD Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC13 High-Density Filtered Adapter for Telecommunications Within the telecommunications industry, it has been standard practice to use an adapter (male/female) type of EMI filtered connector as the interface between the switching system electronics and the premise wiring. These filtered adapters provide effective containment of EMI compared to either D-subminiature or 50-position "ribbon" contact type connectors. The following several factors have mandated the development of a new generation of filtered adapters. Special Requirements Mechanical Specifications Shell . . . . . . . . . . . . Zinc or aluminum diecast, nickel . . . . . . . . . . . . . . . . plated 150 inches (3.81 m) min. Insulators . . . . . . . . Thermoplastic, UL94V-0 Higher density wiring The need for more contacts, usually a multiple of 16 Contacts . . . . . . . . . One-piece, screw machined . . . . . . . . . . . . . . . . Copper alloy, contact area plated . . . . . . . . . . . . . . . . 50 inches (1.27 m) gold . . . . . . . . . . . . . . . . over 50 inches (1.27 m) nickel Higher reliability contact geometries Ground Plane . . . . . Brass, solder plated Bellcore TR-NWT-001089 requirements Grounding Springs . . . . . . . . . . Beryllium copper, tin plated per . . . . . . . . . . . . . . . . MIL-T-10727 1000 volts AC withstand for one minute 2500 volts spike surge testing Improved flammable resistant plastic insulators API's Spectrum Control brand, in response to these unique requirements of the telecommunication industry, has developed a new high-density filtered adapter. Features New ceramic technology and filter element construction to accept higher voltages Improved reliability compared to "ribbon" type connectors Integral ground plane and one-piece diecast housing for the highest level of EMI integrity More contacts/wires per square inch of panel space through high-density arrangements 64 contact positions standard, with 78 positions available by request in any filter combination Operating Temperature. . . . . . . -55C to +125C Capacitor. . . . . . . . . High performance ceramic . . . . . . . . . . . . . . . . feed-through utilizing ultra low . . . . . . . . . . . . . . . . ESR design Electrical Specifications Rated Voltage. . . . . . 100 VDC Current Rating . . . . . . . . . . . 3 Amps DC Resistance . . . . . 15 milliohm max. Dielectric Withstanding Voltage . . . . . . . . . . 1000 VRMS (FCC Part 68 test) Capacitance . . . . . . . 1000 pF, 25% Voltage Surge . . . . . meets 2500 volts surge (10/1000) . . . . . . . . . . . . . . . . (See Wave form figure on . . . . . . . . . . . . . . . . next page) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC14 50 High-Density Filtered Adapter for Telecommunications Insertion Loss (dB) 40 30 Filter Performance 20 Minimum Insertion Loss 20 MHz 50 MHz 100 MHz 500 MHz 1 GHz 2 GHz 5 GHz Typical Insertion Loss 10 . . . . . . . . . . . . . . . . . . . . . . 7 dB . . . . . . . . . . . . . . . . . . . . . 14 dB . . . . . . . . . . . . . . . . . . . . . 20 dB . . . . . . . . . . . . . . . . . . . . . 32 dB . . . . . . . . . . . . . . . . . . . . . 35 dB . . . . . . . . . . . . . . . . . . . . . 41 dB . . . . . . . . . . . . . . . . . . . . . 39 dB 0 1MHz 10MHz 100MHz Frequency 1GHz 5GHz Above curves represent application of proper grounding fundamentals, for assistance consult with API. Insertion loss measured per MIL-STD-220, no load, 50 ohm source and load. Above data represents guaranteed minimum. Pulse Wave Form* (10 x 1000) Part Number for Ordering: #56-645-002 Peak Pulse Voltage, % Vpp .050 (1.27) Peak Value - Vpp 50 .243 (6.17) .238 (6.05) 1.000 (25.40) Side View #4-40 UNC - 2B Locking Inserts 4 plcs. 21 2 2.079 (52.81) 38 0 Test Waveform Parameters tr = 10sec tp = 1000s tr 100 .520 (13.21) Hall Value - Vpp 2 10 x 1000 Waveform 0 tp 1 et 2 3 4 t - - Time - - msec 5 6 * Reference Bellcore TR-NWT-1089, Vpp = 1000V 19 .440 (11.18) 41 60 Pin Face 77 58 Position numbers shown for reference 2.635 (66.93) 2.062 (52.37) .082 (2.08) .190 (4.83) .190 (4.83) .615 (15.62) .041 (1.04) .0475 (1.21) .416 (10.57) .095 (2.41) 2.406 (61.11) Socket Face Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC15 Typical Insertion Loss 80 70 Insertion Loss (dB) Series 700 High Performance Filtered Connectors Filter Selection API's Spectrum Control brand of Series 700 connectors offer the highest performance filtering for all types of professional applications. 50 40 30 20 10 0 1MHz 10MHz 100MHz Frequency 1GHz 1MHz 10MHz 100MHz Frequency 1GHz 80 70 Features Available in 9, 15, 25, 37 and 50 shell sizes n Variety of termination configurations including right angle and straight PCB for both pin and socket contact and as an adapter 60 Insertion Loss (dB) n n 60 Capacitive and Pi type filters in a full range of capacitance values The catalog data for this series is presented in order of shell size, and grouped by pin and socket contacts. Part numbers must be selected from the tables within the series section. 50 40 30 20 10 0 Above curves represent application of proper grounding fundamentals, for assistance, consult API. Insertion loss measured per MIL-STD-220, no load, 50ohm source and load. Electrical Specifications: High Performance Connectors Capacitance Filter Designations Filter Circuits Value Tol. 3 dB Cut-off Frequency Max. (MHz) Minimum Insertion Loss - Decibels (dB) Dielectric Working WithVoltage DC 5 standing -55C to MHz Voltage +125C 10 MHz 20 MHz 50 MHz 100 MHz 200 MHz 500 MHz 1 GHz J 100 pF +100 -0% 32 300V 100V -- -- -- 2 5 8 16 33 A 310 pF 17 300V 100V -- -- 2 6 10 17 33 50 1000 pF +150 -0% 3.2 300V 100V -- 3 8 17 27 39 58 70 K 2500 pF +100 -0% 1.3 150V 50V 6 10 15 30 42 55 70 70 E 4000 pF +100 -0% 0.8 150V 50V 8 13 20 37 50 64 70 70 C Pi 20% N 375 pF 20% 14 600V 200V -- -- 2 7 12 18 26 32 L 500 pF 20% 10.6 600V 200V -- -- 3 9 14 20 28 34 830 pF 20% 6.4 600V 200V -- 3 7 13 18 24 32 38 F C B 1000 pF +100 -0% 3.2 600V 200V -- 4 9 16 22 28 36 42 D 5000 pF +100 -0% 0.64 300V 100V 10 16 22 30 35 41 50 56 Filter designation "G" for grounded contacts, "I" for insulated (not filtered) contacts. Filter designation "O" for omitted contact and no hole in ground plane. Above data represents guaranteed minimum. API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC16 Series 700 Specifications and Connector Ordering Mechanical Specifications Shell . . . . . . . . . . . . Zinc or aluminum diecast, nickel plated . . . . . . . . . . . . . . . . 150 inches (3.81 m) min. Insulators . . . . . . . . Glass-filled polyester, . . . . . . . . . . . . . . . . flammability UL94V-0 Ordering Your Connector STEP 1: SELECTING THE FILTER Using the insert loss graphs on page FC20 determine which filters provide the required attenuation at the troublesome frequency, while not affecting the signal frequency by more than 3 to 6 dB. Terminations . . . . . . Gold flash for PCB mount and solder . . . . . . . . . . . . . . . . cups. Solder dipped also available. Choose the filter type, either feed-through capacitor or Pi. The Pi is generally considered better due to its superior high frequency performance and steeper curve. The feed-through capacitor is lower cost. Select capacitance value. Ground Plane . . . . . Brass, solder plated Note the Spectrum letter designation for the filter chosen from the table on page FC20. Pin Contacts . . . . . . Copper alloy, 15 inches . . . . . . . . . . . . . . . . (0.38 m) gold plated * over nickel Socket Contacts . . . . Copper alloy, 30 inches . . . . . . . . . . . . . . . . (0.76 m) gold plated * over nickel . . . . . . . . . . . . . . . . * Heavier gold plating available upon request. . . . . . . . . . . . . . . . . . . . . . . See pg. FC43: Connector Options Grounding Springs . . . . . . . . . . Beryllium copper, tin plated per . . . . . . . . . . . . . . . . MIL-T-10727 Operating Temperature. . . . . . . -55C to +125C STEP 2: SELECTING THE CONNECTOR Turn to the appropriate size section. (9, 15, 25, 37, 50) Choose either pin contacts (plug) or socket contacts (receptacle). Electrical Specifications Choose the required termination type. Current Rating . . . . 5 Amps R.F. Current Rating . . . . . . . . . . . 0.3 Amps From the table on the appropriate connector page, using the filter letter designation chosen in step 1 above, select the part number. STEP 3: SPECIFYING OPTIONS Capacitors . . . . . . . . Proprietary barium titanate . . . . . . . . . . . . . . . . ceramic formulations Contact Resistance . . . . . . . . 10 milliohms maximum Refer to page FC43 for special options including heavy gold plating, 4-40 mounting threads, grounding brackets, hardware, and others. Most options are available within the standard lead times. Some options require a part number suffix, while other combinations may require factory assistance for part number assignment. If a suffix is shown, add it to your selected part number. If more than one option is needed, consult with factory for part number assignment. UL Recognized. . . . . Under category of communication . . . . . . . . . . . . . . . . circuit accessories, File #E149046 Inductance on PI Filters . . . . . . . . . ~ 860 nH between 100 kHz and 1 MHz Solder cups accept up to a 20 gauge wire. Note: For additional mechanical, electrical, and environmental specifications, refer to page FC79. API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC17 9 Shell Size Series 700 Pin Contact Printed Circuit Board Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi 56-701-003 B 1000 pF C C 1000 pF Pi 56-701-005 D 5000 pF C E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C 56-701-001 56-701-002 56-701-004 56-701-028 56-701-029 56-701-030 56-701-047 56-701-086 Mating Face Side View Termination Face Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi B 1000 pF C 56-702-004 C 1000 pF Pi D 5000 pF C 56-702-007 E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C * 56-702-001 56-702-002 * 56-702-003 * 56-702-005 56-702-008 56-702-009 56-702-013 * 56-702-033 * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Mating Face Termination Face Side View Bottom View Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC18 9 Shell Size Series 700 Pin Contact Solderless Wire Wrap Spectrum Part Number 56-701 56-701 56-701 56-701 56-701 56-701 56-701 56-701 56-701 L .500 -006 -007 -008 -009 -010 -037 -038 -039 -050 L .375 Select one -022 -023 -024 -025 -026 -034 -035 -036 -049 L .250 Filter Desig.** Cap. Value -018 A 310 pF Pi B 1000 pF C -020 C 1000 pF Pi -021 D 5000 pF C -031 E 4000 pF Pi -032 F 830 pF C -033 J 100 pF Pi -048 K 2500 pF Pi N 375 pF C -017 -019 Solder Cup Termination Spectrum Part Number EMI Filter Cap. Value A 310 pF Pi B 1000 pF C * 56-701-014 C 1000 pF Pi D 5000 pF C * 56-701-040 E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C * 56-701-012 * 56-701-013 * 56-701-015 56-701-041 56-701-042 56-701-081 56-701-087 Side View Termination Face EMI Filter Filter Designation** * 56-701-011 Mating Face * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Mating Face Side View Termination Face Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC19 9 Shell Size Series 700 Socket Contact Printed Circuit Board Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi 56-703-003 B 1000 pF C C 1000 pF Pi 56-703-005 D 5000 pF C E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C 56-703-001 56-703-002 56-703-004 56-703-022 56-703-023 56-703-024 56-703-036 56-703-047 Mating Face Side View Termination Face Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi B 1000 pF C 56-704-004 C 1000 pF Pi D 5000 pF C 56-704-007 E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C 56-704-001 56-704-002 * 56-704-003 * 56-704-005 56-704-008 56-704-009 56-704-018 56-704-035 * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Termination Face Mating Face Side View Bottom View Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC20 9 Shell Size Series 700 Socket Contact & Pin/Socket Adapter Solderless Wire Wrap Spectrum Part Number 56-703 56-703 56-703 56-703 * 56-703 56-703 56-703 56-703 56-703 L .500 -006 -007 -008 -009 -010 -031 -032 -033 -039 L L .375 .250 -016 -011 -017 -012 -018 -013 -019 -014 -020 * -015 -028 -025 -029 -026 -030 -027 -038 -037 Select one Solder Cup Termination Spectrum Part Number * 56-706-001 56-706-002 * 56-706-003 56-706-004 * 56-706-005 56-706-006 56-706-007 * 56-706-008 56-706-009 56-706-017 * 56-705-001 56-705-002 * 56-705-003 56-705-004 * 56-705-005 * 56-705-008 56-705-009 56-705-010 56-705-026 56-705-049 Filter Desig.** A B C D E F J K N Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C Mating Face Termination Face Side View EMI Filter Filter Designation** A B C D E F J K N L Pin/Socket Adapter Spectrum Part Number EMI Filter Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Mating Face Termination Face Side View EMI Filter Filter Designation** A B C D E F J K N L Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Also available through API's authorized European distributors/agents. * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Socket Face Pin Face Side View Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC21 15 Shell Size Series 700 Pin Contact Printed Circuit Board Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi 56-711-003 B 1000 pF C C 1000 pF Pi 56-711-005 D 5000 pF C E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C 56-711-001 56-711-002 56-711-004 56-711-028 56-711-029 56-711-030 56-711-048 56-711-088 Mating Face Side View Termination Face Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi B 1000 pF C 56-712-004 C 1000 pF Pi D 5000 pF C * 56-712-007 E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C * 56-712-001 56-712-002 * 56-712-003 * 56-712-005 56-712-008 56-712-009 56-712-017 56-712-039 * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Mating Face Termination Face Bottom View Side View Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC22 15 Shell Size Series 700 Pin Contact Solderless Wire Wrap Spectrum Part Number 56-711 56-711 56-711 56-711 56-711 56-711 56-711 56-711 56-711 L .500 -006 -007 -008 -009 -010 -037 -038 -039 -051 L .375 Select one -023 -024 -025 -026 -027 -034 -035 -036 -050 L .250 Filter Desig.** Cap. Value -019 A 310 pF Pi B 1000 pF C -021 C 1000 pF Pi -022 D 5000 pF C -031 E 4000 pF Pi -032 F 830 pF C -033 J 100 pF Pi -049 K 2500 pF Pi N 375 pF C -018 -020 Solder Cup Termination Spectrum Part Number EMI Filter Cap. Value A 310 pF Pi B 1000 pF C 56-711-014 C 1000 pF Pi D 5000 pF C * 56-711-040 E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C 56-711-012 * 56-711-013 * 56-711-015 56-711-041 56-711-042 56-711-085 56-711-086 Side View Termination Face EMI Filter Filter Designation** * 56-711-011 Mating Face * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Mating Face Side View Termination Face Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC23 15 Shell Size Series 700 Socket Contact Printed Circuit Board Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi 56-713-003 B 1000 pF C C 1000 pF Pi 56-713-005 D 5000 pF C E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C 56-713-001 56-713-002 56-713-004 56-713-021 56-713-022 56-713-023 56-713-037 56-713-045 Mating Face Side View Termination Face Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi B 1000 pF C 56-714-004 C 1000 pF Pi D 5000 pF C * 56-714-006 E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C * 56-714-001 56-714-002 * 56-714-003 * 56-714-005 56-714-007 56-714-008 56-714-017 56-714-031 * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Mating Face Termination Face Side View Bottom View Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC24 15 Shell Size Series 700 Socket Contact & Pin/Socket Adapter Solderless Wire Wrap Spectrum Part Number 56-713 56-713 56-713 56-713 56-713 56-713 56-713 56-713 56-713 L .500 -006 -007 -008 -009 -010 -030 -031 -032 -040 L .375 -016 -017 -018 -019 -020 -027 -028 -029 -039 Select one L .250 -011 -012 -013 -014 -015 -024 -025 -026 -038 Solder Cup Termination Spectrum Part Number * 56-716-001 56-716-002 * 56-716-003 56-716-004 * 56-716-005 56-716-006 56-716-007 * 56-716-008 56-716-009 56-716-013 * 56-715-001 56-715-002 * 56-715-003 56-715-004 * 56-715-005 56-715-007 56-715-008 56-715-009 56-715-015 56-715-040 Filter Desig.** A B C D E F J K N Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C Mating Face Termination Face Side View EMI Filter Filter Designation** A B C D E F J K N L Pin/Socket Adapter Spectrum Part Number EMI Filter Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Mating Face Termination Face Side View EMI Filter Filter Designation** A B C D E F J K N L Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Also available through API's authorized European distributors/agents. * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Socket Face Pin Face Side View Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC25 25 Shell Size Series 700 Pin Contact Printed Circuit Board Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi 56-721-003 B 1000 pF C C 1000 pF Pi 56-721-005 D 5000 pF C E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C 56-721-001 56-721-002 56-721-004 56-721-033 56-721-034 56-721-035 56-721-063 56-721-111 Mating Face Side View Termination Face Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi B 1000 pF C 56-722-004 C 1000 pF Pi D 5000 pF C * 56-722-008 E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C * 56-722-001 56-722-002 * 56-722-003 * 56-722-005 56-722-009 56-722-010 56-722-027 56-722-060 * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Termination Face Mating Face Bottom View Side View Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC26 25 Shell Size Series 700 Pin Contact Solderless Wire Wrap Spectrum Part Number 56-721 56-721 56-721 56-721 56-721 56-721 56-721 56-721 56-721 L .500 -006 -007 -008 -009 -010 -042 -043 -044 -066 L .375 Select one -028 -029 -030 -031 -032 -039 -040 -041 -065 L .250 Filter Desig.** Cap. Value -025 A 310 pF Pi B 1000 pF C -022 C 1000 pF Pi -027 D 5000 pF C -036 E 4000 pF Pi -037 F 830 pF C -038 J 100 pF Pi -064 K 2500 pF Pi N 375 pF C -024 -026 Solder Cup Termination Spectrum Part Number EMI Filter Cap. Value A 310 pF Pi B 1000 pF C 56-721-014 C 1000 pF Pi D 5000 pF C * 56-721-045 E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C * 56-721-012 * 56-721-013 * 56-721-015 56-721-046 56-721-047 56-721-070 56-721-112 Side View Termination Face EMI Filter Filter Designation** * 56-721-011 Mating Face * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Mating Face Side View Termination Face Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC27 25 Shell Size Series 700 Socket Contact Printed Circuit Board Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi 56-723-003 B 1000 pF C C 1000 pF Pi 56-723-005 D 5000 pF C E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C 56-723-001 56-723-002 56-723-004 56-723-023 56-723-024 56-723-025 56-723-045 56-723-069 Mating Face Side View Termination Face Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi B 1000 pF C 56-724-004 C 1000 pF Pi D 5000 pF C * 56-724-008 E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C * 56-724-001 56-724-002 * 56-724-003 * 56-724-005 56-724-009 56-724-010 56-724-021 56-724-046 * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Termination Face Mating Face Side View Bottom View Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC28 25 Shell Size Series 700 Socket Contact & Pin/Socket Adapter Solderless Wire Wrap Spectrum Part Number * 56-723 56-723 * 56-723 56-723 * 56-723 * 56-723 56-723 56-723 56-723 L .500 -006 -007 -008 -009 -010 -032 -033 -034 -048 L .375 -017 -018 -019 -020 -021 -029 -030 -031 -047 Select one L .250 * -012 -013 * -014 -015 * -016 * -026 -027 -028 -046 Solder Cup Termination Spectrum Part Number * 56-726-001 56-726-002 * 56-726-003 56-726-004 * 56-726-005 56-726-006 56-726-007 * 56-726-008 56-726-009 56-726-021 * 56-725-001 56-725-002 * 56-725-003 56-725-004 * 56-725-005 * 56-725-019 56-725-020 * 56-725-021 56-725-064 56-725-073 Filter Desig.** A B C D E F J K N Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C Mating Face Termination Face Side View EMI Filter Filter Designation** A B C D E F J K N L Pin/Socket Adapter Spectrum Part Number EMI Filter Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Mating Face Termination Face Side View EMI Filter Filter Designation** A B C D E F J K N L Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Also available through API's authorized European distributors/agents. * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Socket Face Pin Face Side View Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC29 37 Shell Size Series 700 Pin Contact Printed Circuit Board Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi 56-731-003 B 1000 pF C C 1000 pF Pi 56-731-005 D 5000 pF C E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C 56-731-001 56-731-002 56-731-004 56-731-028 56-731-029 56-731-030 56-731-048 56-731-076 Mating Face Termination Face Side View Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi B 1000 pF C 56-732-004 C 1000 pF Pi D 5000 pF C 56-732-006 E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C 56-732-001 56-732-002 * 56-732-003 * 56-732-005 56-732-007 56-732-008 56-732-009 56-732-023 * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Mating Face Termination Face Side View Bottom View Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC30 37 Shell Size Series 700 Pin Contact Solderless Wire Wrap Spectrum Part Number 56-731 56-731 56-731 56-731 56-731 56-731 56-731 56-731 56-731 L .500 -006 -007 -008 -009 -010 -037 -038 -039 -051 L .375 Select one -023 -024 -025 -026 -027 -034 -035 -036 -050 L .250 Filter Desig.** Cap. Value -019 A 310 pF Pi B 1000 pF C -021 C 1000 pF Pi -022 D 5000 pF C -031 E 4000 pF Pi -032 F 830 pF C -033 J 100 pF Pi -049 K 2500 pF Pi N 375 pF C -018 -020 Solder Cup Termination Spectrum Part Number EMI Filter Cap. Value A 310 pF Pi B 1000 pF C 56-731-014 C 1000 pF Pi D 5000 pF C * 56-731-040 E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C 56-731-012 * 56-731-013 * 56-731-015 56-731-041 56-731-042 56-731-060 56-731-077 Side View Termination Face EMI Filter Filter Designation** * 56-731-011 Mating Face * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Mating Face Side View Termination Face Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC31 37 Shell Size Series 700 Socket Contact Printed Circuit Board Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi 56-733-003 B 1000 pF C C 1000 pF Pi 56-733-005 D 5000 pF C E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C 56-733-001 56-733-002 56-733-004 56-733-021 56-733-022 56-733-023 56-733-035 56-733-046 Mating Face Side View Termination Face Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi B 1000 pF C 56-734-004 C 1000 pF Pi D 5000 pF C 56-734-006 E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C 56-734-001 56-734-002 56-734-003 56-734-005 56-734-007 56-734-008 56-734-012 56-734-021 * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Mating Face Termination Face Side View Bottom View Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC32 37 Shell Size Series 700 Socket Contact & Pin/Socket Adapter Solderless Wire Wrap Spectrum Part Number * 56-733 56-733 56-733 56-733 56-733 56-733 56-733 56-733 56-733 L .500 -006 -007 -008 -009 -010 -030 -031 -032 -038 L L .375 .250 -016 * -011 -017 -012 -018 -013 -019 -014 -020 -015 -027 -024 -028 -025 -029 -026 -037 -036 Select one Solder Cup Termination Spectrum Part Number * 56-736-001 56-736-002 * 56-736-003 56-736-004 * 56-736-005 56-736-006 56-736-007 * 56-736-008 56-736-009 56-736-015 * 56-735-001 56-735-002 * 56-735-003 56-735-004 * 56-735-005 * 56-735-008 56-735-009 56-735-010 56-735-025 56-735-034 Filter Desig.** A B C D E F J K N Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C Mating Face Side View Termination Face EMI Filter Filter Designation** A B C D E F J K N L Pin/Socket Adapter Spectrum Part Number EMI Filter Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Mating Face Side View Termination Face EMI Filter Filter Designation** A B C D E F J K N L Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Also available through API's authorized European distributors/agents. * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Socket Face Side View Pin Face Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC33 50 Shell Size Series 700 Pin Contact Printed Circuit Board Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi 56-741-003 B 1000 pF C C 1000 pF Pi 56-741-005 D 5000 pF C E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C 56-741-001 56-741-002 56-741-004 56-741-027 56-741-028 56-741-029 56-741-042 56-741-066 Mating Face Termination Face Side View Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi B 1000 pF C C 1000 pF Pi 56-742-005 D 5000 pF C 56-742-006 E 4000 pF Pi 56-742-007 F 830 pF C 56-742-008 J 100 pF Pi 56-742-009 K 2500 pF Pi N 375 pF C L 500 pF C 56-742-001 56-742-002 56-742-003 56-742-004 56-742-022 * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Mating Face Termination Face Side View Bottom View Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC34 50 Shell Size Series 700 Pin Contact Solderless Wire Wrap Spectrum Part Number 56-741 56-741 56-741 56-741 56-741 56-741 56-741 56-741 56-741 L .500 -006 -007 -008 -009 -010 -036 -037 -038 -045 L .375 Select one -022 -023 -024 -025 -026 -033 -034 -035 -044 L .250 Filter Desig.** Cap. Value -018 A 310 pF Pi B 1000 pF C -020 C 1000 pF Pi -021 D 5000 pF C -030 E 4000 pF Pi -031 F 830 pF C -032 J 100 pF Pi -043 K 2500 pF Pi N 375 pF C -017 -019 Solder Cup Termination Spectrum Part Number EMI Filter Cap. Value A 310 pF Pi B 1000 pF C * 56-741-014 C 1000 pF Pi D 5000 pF C 56-741-039 E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C * 56-741-012 * 56-741-013 * 56-741-015 56-741-040 56-741-041 56-741-063 56-741-067 Side View Termination Face EMI Filter Filter Designation** * 56-741-011 Mating Face * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Mating Face Side View Termination Face Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC35 50 Shell Size Series 700 Socket Contact Printed Circuit Board Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi 56-743-003 B 1000 pF C C 1000 pF Pi 56-743-005 D 5000 pF C E 4000 pF Pi F 830 pF C J 100 pF Pi K 2500 pF Pi N 375 pF C L 500 pF C 56-743-001 56-743-002 56-743-004 56-743-021 56-743-022 56-743-023 56-743-033 56-743-043 Mating Face Side View Termination Face Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value A 310 pF Pi B 1000 pF C C 1000 pF Pi 56-744-005 D 5000 pF C 56-744-006 E 4000 pF Pi 56-744-007 F 830 pF C 56-744-008 J 100 pF Pi 56-744-009 K 2500 pF Pi N 375 pF C L 500 pF C 56-744-001 56-744-002 56-744-003 56-744-004 56-744-012 * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 Mating Face Termination Face Side View Bottom View Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC36 50 Shell Size Series 700 Socket Contact & Pin/Socket Adapter Solderless Wire Wrap Spectrum Part Number 56-743 56-743 56-743 56-743 56-743 56-743 56-743 56-743 56-743 L .500 -006 -007 -008 -009 -010 -030 -031 -032 -036 L .375 -016 -017 -018 -019 -020 -027 -028 -029 -035 Select one L .250 -011 -012 -013 -014 -015 -024 -025 -026 -034 Solder Cup Termination Spectrum Part Number 56-746-001 56-746-002 56-746-003 56-746-004 56-746-005 56-746-006 56-746-007 56-746-008 56-746-009 56-746-018 * 56-745-001 56-745-002 * 56-745-003 56-745-004 * 56-745-005 56-745-006 56-745-007 56-745-008 56-745-019 56-745-027 Filter Desig.** A B C D E F J K N Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C Mating Face Termination Face Side View EMI Filter Filter Designation** A B C D E F J K N L Pin/Socket Adapter Spectrum Part Number EMI Filter Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Mating Face Side View Termination Face EMI Filter Filter Designation** A B C D E F J K N L Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 * May be available from distributor stock. ** See page FC20 for filter performance. Standard Tolerance = .005 except where noted, = .015 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Socket Face Side View Pin Face Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC37 D-Subminiature Part Numbering System Ordering Information Example: 56-513-012-TI 56 - 5 1 3 - 0 12 Product Series Options - Shell Size 4 = Series F Ferrite 5 = Series 500 Low Profile 6 = Series 600 Hi-Density 7 = Series 700 High Performance Filtered D-Subminiature Connectors - Standard connector F - RoHS compliant version Series 400 & Series 500 0 = 9 Contacts 1 = 15 Contacts 2 = 25 Contacts 3 = 37 Contacts See options descriptions on page FC43 add suffix ending TI Series F HD = Hi-Density (15 socket only) Line Filtering Capacitance Value 0 = All positions same Series 400 01 = Always 9 = Special loading (Series 600 only) Series 600 Hi-Density 0 = 15 Contacts 1 = 26 Contacts 2 = 44 Contacts 3 = 62 Contacts 4 = 78 Contacts Series 700 0 = 9 Contacts 1 = 15 Contacts 2 = 25 Contacts 3 = 37 Contacts 4 = 50 Contacts Contact Type/Termination 1 2 3 4 5 6 7 = = = = = = = Pin to solder cup Pin to 90 PCB mount Socket to straight PCB mount Socket to 90 PCB mount Pin-socket adapter Socket to solder cup Pin to straight PCB mount Styles available for: Series 400 only 2, 3, 4, 7 Series 500 only 2, 3, 4 & 7 Series 600 only 1, 2, 3, 4, 5 Series 700 1 thru 7 Series 500 10 = 120 pF 11 12 13 14 = = = = 440 pF 840 pF 1000 pF 1500 pF Series 600 15 = 85 pF FT 16 = 180 pF FT 18 = 1000 pF FT 19 = 4000 pF FT 20 = Insulated contact Series 500 TI = 4-40 threads on mounting flange (.125" hole if not selected) GBL = Grounded board lock includes 4-40 threads (available only on 90 PCB) GBLF = Grounded board lock and ferrite slab provides enhanced LC performance. (Available only on 90 PCB) Series 600 Hi-Density LI = 4-40 UNC inserts 50G = 50 (1.27 m) gold GBL = Ground board lock Series 700 LI = 4-40 UNC inserts LIM = Metric M3.0 self-locking threads GB = Metal bracket provides ground Series 700 connection, includes 4-40 See filter specifiself-locking threads (for right angle cation chart on mount only) page FC20 and GBL = Grounded board lock select part numbers (right angle) from Series 700 charts pages GBL6 = for .062" boards (straight FC22-FC41. PCB mount) (1.57mm) GBL9 = for .093" boards (straight PCB mount (2.36mm) 50G = 50 (1.27 m) gold plating S = Solder dipped tails/Solder Cups* JS = Jackscrew mounting For option combinations, consult factory. *Dipped Solder Cup - No socket to solder cup product - Solder cups may be full of solder - Standard part: Sn60 or equivalent - RoHS Part: Sn96 or equivalent Note: 1 can be Pin to solder cup or Pin to PCB for Series 700. See charts pages FC22-FC41. To assist your efforts in selecting the correct Filtered Connector to meet your needs, we have developed a part numbering system. All of the standard products are shown in their respective catalog pages. Part number 56-513-012-TI represents a Series 500 connector with 15 contacts in a socket to straight PCB mount configuration. All connector positions have a capacitance value of 840 pF and there are 4-40 threads on mounting flange. API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC38 Threaded Inserts Adapter Connector D-Subminiature Connector Options Locking Insert Threaded Inserts Available on Series 500, 600 & 700 #4-40 UNC or metric M3.0 threaded inserts in mounting flanges Allows ease of panel-assembly Plated steel inserts with last thread upset for torque 4 Places Stand-off with Board Lock Feature For straight PCB connectors, available on Series 700 Allows shell grounding to board Eliminates stress on filter terminations Tin plated brass stand-off with snap-in feature Available for .062" (1.57mm) or .093" (2.36mm) thick boards 2 Places Grounding Brackets .265 (6.73) O.125 (3.18) thru (typ) Flame retardant lead spacer (Phenolic) Grounding Bracket For right angle mount PCB connectors, available on Series 700 Metal bracket in place of plastic Provides ground connection direct from circuit board Allows shell grounding to board Includes 4-40 threads Locking Insert Connector flange .540 (13.72) O.160 (4.06) thru (typ) A B #4-40 UNC-2B eyelets (typ) .375 (9.53) .250 (6.35) Size 9 15 25 37 .984 1.312 1.852 2.500 A Connector flange Right angle bracket .086 (2.18) (24.99) (33.32) (47.04) (63.50) B 1.214 1.542 2.088 2.730 (30.84) (39.17) (53.04) (69.34) Stand-off with Board Lock Grounding Bracket with Board Lock Snap-in, no hardware needed, 4-40 threads included For use on .062" (1.57mm) thick boards Gold Plating Available on Series 600 & 700 High reliability applications, 50" (1.27 m) gold over 50" (1.27 m) nickel Solder Dipped Tails Available on Series 600 & 700 connectors Solder dipped tails added to standard gold flash Water Block .440.010 (11.18.25)) For right angle mount PCB connectors, available on Series 500 & 700 Metal bracket provides grounding Consult API engineers for specifics. Internally sealed in accordance with NEMA Standard Rain Test section 6.4 (also UL50 part 28 ram test for submersion, section 6.10.1) For .062 (1.57) or .093 (2.36) thick PC board .187 (4.75) dia. stand-off For .120 (3.05) dia. mounting hole Grounding Bracket with Board Lock (see above for grounding bracket details) #4-40 UNC - 2B 2 places .170 (4.32) .494 (12.55) For .062 (1.57) thick board For .125 (3.18) O mounting hole Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC39 Filtered Combo D-Subminiature Connectors API's Spectrum Control line of filtered combo D-subs provide high insertion loss with capacitive filtering. These connectors are available with 20 Amp power contacts or 40 Amp power contacts. Configurations include male and female versions with straight PC terminals, right angle PC terminals or solder cup terminals. Standard D-sub shell sizes provide intermateability with unfiltered connectors. High strength epoxy potting protects ceramic elements. Capacitive filtering is available in 470, 820, 1000 and 1500 pF. Additional capacitance ranges and configurations can be provided upon request. Please consult factory for more information. Mechanical Specifications Telecommunications base station equipment Switching and transmission equipment Shell . . . . . . . . . . . . . . . . . Steel, tin plated Power Contacts . . . . . . . . . Brass, gold plated .000030 in. (0.762 m) minimum Signal Contacts . . . . . . . . . Pin: brass, gold plated . . . . . . . . . . . . . . . . . . . . . .000015 in. (0.762 m) min. . . . . . . . . . . . . . . . . . . . . . Socket: copper alloy, gold plated .000030 in. (0.762 m) min. Insulator . . . . . . . . . . . . . . Glass-filled polyester, . . . . . . . . . . . . . . . . . . . . . flammability UL94V-0 Operating Temperature . . . . -55C to +125C Capacitors . . . . . . . . . . . . . MLCC Power supplies Electrical Specifications Industrial equipment Computer work stations Operating Voltage . . . . . . . 200 VDC Current Rating* . . . . . . . . . 40 Amp power/ 5 Amp signal Insulation Resistance . . . . . 1 Gohm at 100 VDC Capacitance . . . . . . . . . . . . See below for MLCC values. . . . . . . . . . . . . . . . . . . . . . For other capacitance values . . . . . . . . . . . . . . . . . . . . . contact factory. Dielectric Withstanding Voltage . . . . . . . . . . . . . . . 600 VDC Applications Ordering Information Example: 563A03W3101GBL9 56 * 3 A: B: C: G: H: J: N: A 03W3 Pin - PCB Power Pin - Right Angle Power Pin - Solder Cup Power Socket - PCB Power Socket - Right Angle Power Socket - Solder Cup Power Custom Combination * Insert "F" for RoHS compliant 101 *30 Amp available. Consult factory. GBL9 Options Contact Arrangement 03W3 05W5 09W4 24W7 = = = = 3W3 5W5 9W4 24W7 Capacitance Value MLCC 201 = 202 = 203 = 204 = 470 pF 820 pF 1000 pF 1500 pF LI = 4-40 UNC inserts LIM = Metric M3.0 self-locking threads GB = Metal bracket provides ground connection, includes 4-40 self-locking threads (for right angle mount only) GBL = Grounded board lock (right angle) GBL6 = for .062" boards (straight PCB mount) GBL9 = for .093" boards (straight PCB mount 50G = 50 (1.27 m) gold plating S = Solder dipped tails JS = Jackscrew mounting For option combinations, consult factory. See options descriptions on page FC43 add suffix ending API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC40 Filtered Combo D-Subminiature Connectors 3W3 Plug - Solder Cup 1.541.015 (39.140.38) 1.312 (33.32) Epoxy 4-40 Clinch Nut 2 Plc. Mating Face .329 (8.36) .500.015 (12.700.38) .269 (6.83) Typ. .995 (25.27) .233.006 (5.920.15) .055.020 (1.400.51) 1 .036.010 (0.920.25) .217 (5.50) .809.025 (20.550.64) 267122-1 .328.021 (8.330.53) Plug Assembly Contact 3 Plc. .425 (10.80) Max. .128 (3.24) Typ. O 1.025 (26.04) Max. .089 (2.26) 1.134 (28.80) 100 Typ. .449 (11.40) .130 (3.30) 4 Plc. .225 (5.72) .120 (3.05) 2 Plc. O 1.312 (33.32) Recommended Panel Cutout Only represents a few of our available configurations. Consult factory for more information. Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC41 Filtered Combo D-Subminiature Connectors 3W3 Plug - Right Angle .995 (25.27) Contact 3 Plc. Plug Assembly .217 (5.50) .036.010 (0.920.25) .233.006 (5.920.15) .995 (25.27) .269 .269 (6.83) (6.83) Typ. Typ. .120 (3.05) 2 Plc. O .055.020 (1.400.51) .425 (10.80) Max. .500.015 (12.700.38) .329 (8.36) Mating Face Epoxy 1.312 (33.32) .125.025 (3.180.64) Typ. .500 (12.70) 2 Plc. 1.541.015 (39.140.38) .089 (2.26) 1.134 (28.80) 100 Typ. .449 (11.40) o .0625.0010 (1.5880.025) 2 Plc. .130 (3.30) 4 Plc. .225 (5.72) .120 (3.05) 2 Plc. O 1.312 (33.32) Recommended Panel Cutout Only represents a few of our available configurations. Consult factory for more information. .538 (13.66) .269 (6.83) o .077 (1.96) o .004 (.01) 3 Plc. Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC42 Filtered Combo D-Subminiature Connectors 5W5 Plug - Vertical o .128 (3.25) Contact 5 Plc. .125.025 (3.1750.64) .645 (16.38) 2 Plc. .042.010 (1.070.25) 1 .217 (5.51) 93931-1 1.040 (26.42) 5 Plc. Rear Shell .228.004 (5.790.10) 1.535 (38.99) .500.015 (12.700.38) .330 (8.38) 1.852 (47.04) 4-40 UNC Standoff 2 Plc. 2.090.015 (53.090.38) .00 (.000) .356 (9.04) .624 (15.85) .892 (22.66) 1.160 (29.46) 1.496 (38.00) o .140 (3.56) o .010 (0.25) o .125 (3.56) 2 Holes o .010 (0.25) 1.852 (47.04) Recommended PCB Layout Only represents a few of our available configurations. Consult factory for more information. Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC43 Filtered Combo D-Subminiature Connectors 9W4 Socket - Solder Cup Solder Cup 5 Plc. Power Contact 4 Plc. .447.021 (11.350.53) .941.025 (23.900.64) Typ. .223.021 (5.660.53) 1 .036.010 (0.920.25) .242.004 (6.150.10) Front Shell 2.090.015 (53.090.38) 1.852 (47.04) 1.510 (38.35) Insert Mating Face .055.020 (1.400.51) Rear Shell 4-40 Clinch Nuts 2 Plc. .056 (1.42) M 2 A3 1 A2 o .128.003 (3.250.08) 4 Plc. A1 .310 .606.015 (7.87) (15.390.38) 5 4 3 o .062.001 (1.570.03) 5 Plc. .089 (2.26) .112 (2.84) Signal Contact 5 Plc. .570 (14.48) .306 (7.77) 0 .379 (9.63) .325 (8.25) .271 (6.88) .217 (5.51) .163 (4.14) .570 (14.48) .112 (2.84) 1.674 (42.51) 10 Typ. o .120 (3.05) 2 Holes .225 (5.72) 1.852 (47.04) Recommended Panel Cutout .132 (3.35) Typ. Only represents a few of our available configurations. Consult factory for more information. Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC44 Filtered Combo D-Subminiature Connectors 9W4 Socket - Vertical Boardlock 2 Plc. .891.025 (22.630.64) Typ. o .040.002 (1.020.05) 5 Plc. Signal Contact 5 Plc. o .128.003 (3.250.08) 4 Plc. Power Contact 4 Plc. .383.021 (9.720.53) 4 Plc. .397.021 (10.080.53) 5 Plc. 1 .036.010 (0.920.25) .325 (8.26) .300 (7.62) 2 Plc. .242.004 (6.150.10) Front Shell .056 (1.42) 2.090.015 (53.090.38) 1.852 (47.04) 1.510 (38.35) Insert M 2 A3 1 Mating Face A2 Rear Shell .055.020 (1.400.51) 4-40 Standoff 2 Plc. A1 .310 .606.015 (7.87) (15.390.38) .112 (2.84) 1.852 (47.04) Recommended Panel Cutout o .120 (3.05) 2 Holes .132 (3.35) Typ. .326 (23.52) .570 (14.48) .306 (7.77) .379 (9.63) .325 (8.25) .271 (6.88) .217 (5.51) .163 (4.14) 10 Typ. .225 (5.72) .570 (14.48) 1.674 (42.51) .570 (14.48) .306 (7.77) 0 3 .326 (23.52) .089 (2.26) 4 .379 (9.63) .325 (8.25) .271 (6.88) .217 (5.51) .163 (4.14) .112 (2.84) .570 (14.48) 5 .056 (1.42) .000 (0.00) .056 (1.42) o .055 (1.40) o .004 (0.10) 5 Plc. o .140 (3.56) o .010 (0.25) 4 Plc. Posn. 1 o .125.003 (3.180.08) o .010 (0.25) 2 Plc. Recommended PC Board Mounting Dimensions Only represents a few of our available configurations. Consult factory for more information. Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC45 Filtered Combo D-Subminiature Connectors 9W4 Plug - Right Angle .240 (6.10) Power Pin 4 Plc. L Bracket 2 Plc. Signal Pin 5 Plc. .560 (14.22) 2 Plc. Threaded Fastener 2 Plc. .042.010 (1.070.25) Lockwasher 2 Plc. .228.004 (5.790.10) Screwlock 2 Plc. 2.090.015 (53.090.38) 1.535 (38.99) A1 A2 1 A3 .330 (8.38) .055.020 (1.400.51) Mating Face 3 2 4 .262 (6.65) Rear Shell Front Shell A4 .500.015 (2.700.38) 5 .125.025 (3.180.64) Typ. .216 (5.48) 2 Plc. Boardlock 2 Plc. .128.002 (3.250.05) 4 Plc. 1.852 (47.04) .040 (1.02) 5 Plc. .270 (6.86) Epoxy .056 (1.41) 3 Plc. .500 (12.70) 4 Plc. .056 (1.41) 2 Plc. 1.852 (47.04) 1.140 (28.96) .841 (21.36) .926 (23.52) .054 (1.37) 4 Plc. .570 (14.48) .056 (1.42) Typ. .264 (6.71) .230 (5.84) 4 Plc. .112 (2.84) Typ. o .143.003 (3.630.08) o .006 (0.15) 4 Plc. o .055.003 (1.400.08) o .006 (0.15) 5 Plc. Recommended PC Board Mounting Dimensions o .125.003 (3.180.08) o .010 (0.25) 2 Plc. Only represents a few of our available configurations. Consult factory for more information. Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC46 Filtered Combo D-Subminiature Connectors 24W7 Socket - Solder Cup Solder Cup 17 Plc. Power Contact 2 Plc. Rear Shell 4-40 Clinch Nuts 2 Plc. .988.025 (25.090.61) Typ. .036.010 (0.920.25) .242.004 (6.150.10) Front Shell Mating Face 2.063 (52.40) Insert .056 (1.42) Typ. A7 .270 (6.86) Typ. A6 A5 A4 .055.020 (1.400.51) A3 A2 A1 .422 .606.015 (10.72) (15.390.38) 17 .112 (2.84) Typ. 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 o .128.003 (3.250.08) 7 Plc. o .062.001 (1.570.03) 17 Plc. .109 (2.76) Typ. o .494.021 (12.550.53) 17 Plc. Signal Contact 17 Plc. 2.406 (61.11) 2.638.015 (67.010.38) .094 (2.39) Typ. .323.021 (8.200.53) 2.218 (56.34) 100 Typ. .120 (3.05) 2 Plc. O .555 (14.10) .278 (7.06) 2 Plc. 2.406 (61.11) Recommended Panel Cutout .132 (3.35) 4 Plc. Only represents a few of our available configurations. Consult factory for more information. Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC47 D-Subminiature Adapter Test Kit & Hardware Adapter Test Kit Specially designed for EMI evaluation process Adapter Test Kit Male/female adapter part Easily plugged into equipment under testing conditions Hardware Ideal for new products and retrofitting Designed to provide simple and effective mounting Each adapter test kit includes: Hexagonal Spacer 20 filtered adapters Tapped spacer fits between flanges Four shell sizes 9, 15, 25 and 37 Provide retrofit of 4-40" threads Four filter ranges: Series 700 - 310 pF Pi Two spacers per adapter required, packaged in bulk - 830 Hexagonal Spacer pF FT .120 Thru-hole - 1000 pF Pi - 4000 pF Pi Ordering Information Description Adapter test kit Adapter test kit with Jackscrew Includes 40 pcs. 56-201-006 Hexagonal Spacer Jackscrew Mounting Hardware For .312" (7.92 mm) length Jackscrew Mounting Hardware For .688" (17.47 mm) length Tubular Spacer Adapter Hexagonal Spacer API Part Number #4-40 UNC Thru-hole 56-700-002 56-700-002-JS Jackscrew Mounting Hardware Male/female jackscrews 56-201-001 (1 per) Standard 4-40 threads for compatibility 56-201-004 (1 per) Two male thread lengths available 56-201-006 (2 per) Two screws per adapter required 56-201-003 (1 per) Lockwasher included, packaged in bulk API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC48 Micro D Series Filtered Connectors For designs that require even smaller connector packages, API's Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors offers a range of reliable filtering options, including capacitive and ESD versions, and several sizes and termination options. API has a Micro D-sub connector to satisfy your smallest space constraints. Features Mechanical Specifications Shell . . . . . . . . . . . . . . . Aluminum, electroless nickel . . . . . . . . . . . . . . . . . . . plated 500 in (12.7 m) minimum Insulator . . . . . . . . . . . . High temperature plastic, . . . . . . . . . . . . . . . . . . . flammability UL94V-0 Light weight Compact size Environmentally sealed contact area when mated Corrosion resistant Durable (500 cycles min.) Superior electrical performance Electrical Specifications RoHS compliant Operating Voltage . . . . . 100 VDC Contacts . . . . . . . . . . . . Copper alloy, gold plated 50 in . . . . . . . . . . . . . . . . . . . (1.27 m) minimum Potting . . . . . . . . . . . . . Flammability UL94V-0 Interfacial Seal . . . . . . . . Silicon Dielectric Withstanding Voltage . . . 300 VDC Current Rating. . . . . . . . 3 Amps Insulation Resistance . . . 5G ohms @ 100 VDC Ordering Information Example: 56-F011-110-JP 56 F 0 1 1 Filtered Connectors RoHS Micro D Compliant Shell Size/ Number of Contacts 0 1 2 3 4 5 - 9 contacts - 15 contacts - 21 contacts - 25 contacts - 31 contacts - 37 contacts Contact Type/Termination 1 2 3 4 6 7 8 9 - Pin to solder cup Pin to right angle* Socket to PC tail* Socket to right angle* Socket to solder cup Pin to PC tail* Pin to pigtail Socket to pigtail * Right angle and PC tail length is 0.109. Other lengths available, consult factory. This part number represents a micro D-sub connector with a shell size of 15 and a pin to solder cup configuration. All lines are filtered with same capacitance value, which is 100 pF COB. The connector includes an optional #2-56 jack post. 1 10 Line Filtering 1 - All positions same 2 - Select load - Capacitance Value/Type High Performance 01 - 100 pF FT 02 - 470 pF FT 03 - 820 pF FT 04 - 1500 pF FT 05 - 4700 pF FT Standard Performance 10 - 100 pF COB 11 - 470 pF COB 12 - 820 pF COB 13 - 1500 pF COB 14 - 4700 pF COB JP Options JP - #2-56 jack post JS - #2-56 jackscrew TI - Threaded insert JT - Jack post and threaded insert GB - Grounding Bracket All capacitance values 20% @ 25C API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC49 Micro D Series Filtered Connectors High Performance Capacitance Working Dielectric Voltage DC Withstanding -55C to Voltage +125C Filter Designation Type Value 01 FT 100 pF 20% 300V 100V 02 FT 470 pF 20% 300V 100V 03 FT 820 pF 20% 300V 04 FT 1500 pF 20% 05 FT 4700 pF 20% Tolerance Standard Performance Capacitance Filter Designation Type Value Tolerance 10 COB 100 pF 20% 10 MHz 20 MHz 50 MHz -- -- -- -- -- -- 2 8 100V -- 2 6 13 300V 100V -- 5 10 300V 100V 8 14 20 Working Dielectric Voltage DC Withstanding -55C to Voltage +125C 5 MHz Minimum Insertion Loss - Decibels (dB) 50 ohm system per MIL-STD-220 (no load) 5 MHz 100 MHz 200 MHz 500 MHz 1 6 14 20 14 20 28 34 19 25 33 39 18 24 30 38 44 28 34 40 48 54 Minimum Insertion Loss - Decibels (dB) 50 ohm system per MIL-STD-220 (no load) 1 GHz 10 MHz 20 MHz 50 MHz 100 MHz 200 MHz 500 MHz 1 GHz -- 1 6 14 20 300V 100V -- -- -- 11 COB 470 pF 20% 300V 100V -- -- 2 8 14 20 28 32 12 COB 820 pF 20% 300V 100V -- 2 6 13 19 25 32 32 13 COB 1500 pF 20% 300V 100V -- 5 10 18 24 30 32 32 14 COB 4700 pF 20% 300V 100V 8 14 20 28 32 32 32 32 E F G H 4 5 7 8 10 11 12 13 15 16 18 19 .200 (5.08) .350 (8.89) .500 (12.70) .600 (15.24) .750 (19.05) .900 (22.86) .250 (6.35) .400 (10.16) .550 (13.97) .650 (16.51) .800 (20.32) .950 (24.13) Right Angle PCB Receptacle Plug Size 9 15 21 25 31 37 A B .775 (19.69) .925 (23.50) 1.075 (27.31) 1.175 (29.85) 1.325 (33.66) 1.475 (37.47) .565 (14.35) .715 (18.16) .865 (21.97) .965 (24.51) 1.115 (28.32) 1.265 (32.13) C (RCPT) .388 (9.86) .538 (13.67) .688 (17.48) .788 (20.02) .938 (23.83) 1.088 (27.64) C (Plug) .330 (8.38) .480 (12.19) .630 (16.00) .730 (18.54) .880 (22.35) 1.030 (26.16) D .390 (9.91) .540 (13.72) .690 (17.53) .790 (20.07) .940 (23.88) .1.090 (27.69) Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC50 Size Micro D Series Filtered Connectors 9 15 21 25 31 37 A B .775 (19.69) .925 (23.50) 1.075 (27.31) 1.175 (29.85) 1.325 (33.66) 1.475 (37.47) .565 (14.35) .715 (18.16) .865 (21.97) .965 (24.51) 1.115 (28.32) 1.265 (32.13) C (RCPT) .388 (9.86) .538 (13.67) .688 (17.48) .788 (20.02) .938 (23.83) 1.088 (27.64) C (Plug) .330 (8.38) .480 (12.19) .630 (16.00) .730 (18.54) .880 (22.35) 1.030 (26.16) D .390 (9.91) .540 (13.72) .690 (17.53) .790 (20.07) .940 (23.88) .1.090 (27.69) Dimensions in inches (mm) Vertical PCB Receptacle Plug Solder Cup Receptacle Plug API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC51 Micro D Series Filtered Connectors Options JP - #2-56 Jack Post M83513/05-07 JS - #2-56 Jack Screw M83513/05-05 TI - Threaded Insert Receptacle TI - Threaded Insert Plug GB - Ground Bracket Receptacle GB - Ground Bracket Plug API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC52 Micro D Series Filtered Connectors Board and Panel Cutouts Pin Connector Shown Vertical PCB Layouts 9 Contacts 15 Contacts 21 Contacts 25 Contacts 31 Contacts 37 Contacts Pin Connector Shown Right Angle PCB Layouts 9 Contacts 25 Contacts 15 Contacts 21 Contacts 31 Contacts 37 Contacts Notes: PC Tail Diameter 0.018 0.002 (0.46 0.05) Contact numbers shown are pin connector. Reverse for socket. Patterns shown are for connector mounting side of PC board. API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC53 Filtered Miniature Ribbon Connectors Features 40 Typical Insertion Loss 35 30 25 Insertion Loss (dB) Filtered miniature ribbon connectors are fully intermateable and interchangeable with existing standard product. Rugged design construction and predictable capacitive filter performance is available in right-angle and male/female adapter versions. Applications for this type of connector are widely diversified and include all phases of the telecommunications industry including original telephone manufacturing, operating telephone companies, cable reclamation, cable manufacturing and bay connectorization. The filtered miniature ribbon connector line is also ideally suited for use in printers, computer terminals, test equipment, business and copying machines, telemetering, and various equipment used in the security industry. 820 pF 20 470 pF 220 pF 15 100 pF 10 Lower installed cost Assists with FCC Part 15; available for Part 68 requirements Applicable for VDE specifications 0871, 0875-0878, Vfg Federal Regulations and VCCI noise requirements Drop-in replacement, matched footprint Electrical Specifications All circuit lines filtered Connector body is recognized under the Component Recognition Program of Underwriters Laboratories, Inc. Plastic components are UL94V-0 rated Connector body is certified by Canadian Standard Association Operating Temperature . . . . . . . . . . . . -55C - 105C Dielectric Withstanding Voltage . . . . . . . . . . . . . . . 1000 VAC min per . . . . . . . . . . . . . . . . . . . . . (FCC Part 68 test) Capacitance . . . . . . . . . . . . 100 pF, 220 pF, 470 pF, . . . . . . . . . . . . . . . . . . . . . 820 pF, 15% (adapter), . . . . . . . . . . . . . . . . . . . . . 20% (connector) Dissipation Factor . . . . . . . 2.5% max (adapter) . . . . . . . . . . . . . . . . . . . . . 5% max (connector) Mechanical Specifications - Adapter 5 0 1 MHz 10 MHz Frequency 100 MHz 1 GHz Shell . . . . . . . . . . . . . . . . . Zinc Thermoplastic Insert. . . . . . . . . . . . . . . . . Black, high strength Contacts . . . . . . . . . . . . . . Copper alloy Contact Plating . . . . . . . . . 30uin (.76um) (min.) . . . . . . . . . . . . . . . . . . . . . gold over nickel Mechanical Specifications - Connector Shell . . . . . . . . . . . . . . . . . Steel, tin plated Thermoplastic Insert. . . . . . . . . . . . . . . . . Blue, 30% glass filled Contacts . . . . . . . . . . . . . . Phosphor bronze Contact Plating . . . . . . . . . Gold flash (<10 in) over nickel API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC54 Filtered Miniature Ribbon Connectors 50 Position Pin Contact 2.946 (74.84) PCB Edge 2.041 (51.84) (plug) .085 (2.16) TYP o .126 .002 (3.20 0.05) 2 PLC .450 (11.43) MAX 2 PLC .453 (11.50) .169 .003 (4.29 0.08) Recommended PCB Layout .085 (2.15) 2 PLC o.035 .002 (0.89 0.05) 50 PLC Filter Top 2.949 .010 (74.90 0.25) 3.264 .015 (82.90 0.38) 100 TYP .155 (3.94) .531 (13.50) Screw #4-40 thread 2 PLC 2.589 (65.75) 1 25 26 50 .025 (0.64) TYP .085 .010 (2.16 0.25) TYP .610 .015 (15.50 0.25) Boardlock 2 PLC Contact 50 PLC Mating Face Shell Bottom .305 .010 (7.75 0.25) TYP Pin Organizer .478 .010 (12.14 0.25) 2 PLC o.130 (3.30) 2 PLC Position 1 Filter .559 (14.21) Dimensions in inches (mm) Part Number 56-882-002 56-882-003 56-882-004 56-882-005 Capacitance Value 100 pF, 20% 220 pF, 20% 470 pF, 20% 820 pF, 20% API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC55 Filtered Miniature Ribbon Connectors 50 Position Socket Contact 2.946 (74.84) PCB Edge (receptacle) .085 (2.16) TYP o.126 0.02 (3.20 0.05) 2 PLC Recommended PCB Layout .450 (11.43) MAX 2 PLC .453 (11.50) 2.041 (51.84) .169 .003 (4.29 0.08) .085 (2.15) 2 PLC o.035 002 (0.89 0.05) 50 PLC Filter Spring Latch 2 PLC Shown in this view only Top 2.949 .010 (74.90 0.25) 3.264 .015 (82.90 0.38) Screw #4-40 thread 2 PLC 2.511 (63.77) 100 TYP .164 (4.17) .465 (11.81) 25 1 50 26 .085 .010 (2.16 0.25) TYP .025 (0.64) TYP .610 .015 (15.50 0.25) .305 .010 (7.75 0.25) TYP CONTACT 50 PLC Mating Face Shell Pin Organizer .478 .010 (12.14 0.25) 2 PLC Bottom .126 (o3.20) 2 PLC Boardlock 2 PLC Filter Position 1 .559 (14.21) Dimensions in inches (mm) Part Number 56-886-002 56-886-003 56-886-004 56-886-005 Capacitance Value 100 pF, 20% 220 pF, 20% 470 pF, 20% 820 pF, 20% API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC56 Filtered Miniature Ribbon Connectors 50 Position Adapter 3.270 (83.06) 2.950 (74.93) 2.040 (51.82) .453 (11.51) .680 (17.27) 2.637 (66.98) .300 (7.62) .780 (19.81) .595 (15.11) 1.400 (35.56) Max. Dimensions in inches (mm) Part Number 56-889-002 56-889-003 56-889-004 56-889-005 Capacitance Value 100 pF 15% 220 pF 15% 470 pF 15% 820 pF 15% Hardware options also available. Consult factory for more information. API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC57 Hooded Strain Reliefs Hooded strain reliefs are used whenever a connector is used on a cable assembly which will be exposed to users and subject to multiple disconnects. Hoods are designed to protect users from shock hazard by exposed solder joints, as well as provide a strain relief for the wires and protection against accidental short circuits. Since most filter connectors are larger than standard connectors, there had been a problem fitting most commercially available hoods. Spectrum Control solves this problem. Our hoods are molded of thin wall plastic, providing extra internal space to accommodate larger filter connectors. The hood is constructed of extremely durable polycarbonate and meets the flammability requirements for UL94V-0. In addition, hoods are ideal for use on applications which require the use of extra components such as resistors or varistors on the wires. The nonconductive hood conveniently houses the connector, components, and protects any joints. 2560-9000-XX is supplied with metal retention clips to hold the connector within the hood assembly. This item is recommended for use with Spectrum Filtered D-subs, most other filtered D-subs, and most standard D-subs. 2560-9001-XX is meant to be used with a connector which has a special eyelet on the mounting flange. This feature is available as an option on the Spectrum Filtered D-sub. Contact factory for additional information. #2560-9000-XX #2560-9001-XX Retention Clip Version "Eyelet" (For use with "Eyelet" connectors) (For use with most connectors) Hood Hood Captive Screw Captive Screw Eyelet Clip Connector Flange Connector Flange with Optional Eyelet Ordering Information and Dimensions Part Number 2560-9000-01 2560-9001-01 2560-9000-02 2560-9001-02 Connector Size A .005 B Max C Max D Max E Max F Max 9 0.984 (24.99) 1.228 (31.19) 1.710 (43.43) 0.985 (25.02) .685 (17.40) .240 (6.07) E D F 15 1.312 (33.33) 1.556 (39.52) 1.710 (43.43) 1.310 (26.71) .685 (17.40) Cable Tie (Not Supplied) .300 (7.62) C 2560-9000-03 2560-9001-03 25 1.852 (47.04) 2.103 (53.42) 1.710 (43.43) 1.850 (46.99) .685 (17.40) .400 (10.16) 2560-9000-04 2560-9001-04 37 2.500 (63.50) 2.744 (69.70) 1.710 (43.43) 2.500 (63.50) .685 (17.40) .400 (10.16) A B Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC60 Custom Engineered Solutions Despite the breadth of our filtered connector product line, there exist certain applications which demand a custom EMC solution. Our engineering staff will work with your design team to provide a custom filtered connector which meets your individual requirements. Examples of custom projects are shown below. Special Mounting Flanges & Value-added Special Mounting Flanges Housings can be designed to be integrated into the customer's equipment. The housings are constructed of machined materials, or precision diecast zinc. Value-added Assemblies API's capabilities extend beyond just supplying filter connectors. Additional operations such as sourcing and assembling flexible circuits, adding flying leads, or making connector to connector assemblies, all can be provided in conjunction with the filter connector. Custom Filter Arrangements Custom Filter Arrangements & Connectors Complex filters involving unbalanced Pi types, LC types with large inductive components, special pin-in to pin-out translations, and overvoltage protective devices such as diodes and varistors can be packaged within the connector. Other Connector Formats Manufacturer specific connectors also can be filtered. Our involvement ranges from complete design to implementing minor modifications to include the addition of the filter components. Medical equipment and hand-held devices are examples of excellent applications for these connectors. VDE RS232 connector Tempest VGA connector adapter FCC VGA connector adapter API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC61 Filtered Connector Performance Specifications The filtered D-subminiature connectors shown in this catalog have been designed and tested to the following test plan. Test Group I II Order of Test Examination of Test The information shown can be used as a basis for your filtered connector specifications. (Contact API for additional details.) Test Method Post Test Requirements 1 Visual and Mechanical Examination 2 Materials, Designs Construction and Workmanship 3 Physical Dimensions and Marking 4 Capacitance MIL-STD-202 Method 305 1 KHz, 1VRMS max. 25C WIthin specified tolerance. 5 Dielectric Withstanding Voltage MIL-STD-202 Method 301 No breakdown or damage. 6 Insulation Resistance MIL-STD-202 Method 302, test condition at rated voltage 5000 megohm minimum. 7 Insertion Loss MIL-STD-220 No load In accordance with applicable requirements. 1 Contact Engagement and Separation MIL-C-24308, Para. 3.5.10 Maximum engagement force 18.0 oz., minimum separation force 0.7 oz. 2 Mating and Unmating Force MIL-C-24308, Para. 3.5.4 MIL-C-24308, Para. 3.5.4 Table II Limits: Shell size 1-5, class G only. 3 Durability MIL-C-24308, Para. 3.5.16, 4.7.18, except 100 cycles MIL-C-24308, Para. 3.5.9 Contact resistance at 1 amp. 20 millohms max. 4 Thermal Shock MIL-STD-202 Method 107, Test condition B, -55C to +125C No evidence of damage. Insulation resistance not less than 2500 megohms. 5 Solderability MIL-STD-202; Method 208, RMA-Flux Terminals shall meet solderability requirements. 6 Moisture Resistance MIL-STD-202 Method 106, less step seven Insulation resistance not less than 500 megohms. Meet dielectric withstanding voltage requirements. 7 Resistance to Soldering Heat MIL-STD-202 Method 210, Test condition D Insulation resistance not less than 500 megohms. Meet dielectric withstanding voltage requirements. 1 Vibration MIL-STD-202 Method 204, Test condition D, 100 mA, current No interruption of current flow longer than 1 microsecond. Insulation resistance greater than 5000 megohms. In accordance with applicable requirements. No interruptions of current flow longer than 1 microsecond. III 2 Shock MIL-STD-202 Method 213. Test Condition G, 100 mA, current Contact resistance at 1 amp. 15 millohms max. Capacitance within specified limits. Insulation resistance greater than 2500 megohms. IV 3 Mounting Inserts a. Prevailing torque (locking) b. Installation torque (locking) c. Push-out Force IFI-100 a. 3 inch-pounds max. b. 6 inch-pounds without damage c. 10 pounds axial force without loosening insert 1 Life MIL-STD-202 Method 108, Test condition D, within 125% of rated voltage at the maximum operating temperature. Filter shall meet all initial requirements except insulation resistance shall not be less than 500 megohms. API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC62 Board & Panel Cutouts B E I J D B E F H G C A .590 (14.99) .315 (8.00) Printed Circuit Vertical Board Mount (standard density) I G J D F C A Front of Flange H Printed Circuit Right Angle Mount (standard density) Board Layout (Pin and Socket Contact) for Standard D-Sub Connectors Shell Size 9 (0) 15 (1) 25 (2) 37 (3) 50 (4) A B C D E F .984 (25.00) .436 = 4 x .109 (11.07) (2.77) .327 = 3 x .109 (8.31) (2.77) .492 (12.50) 1.312 (33.32) .763 = 7 x .109 (19.38) (2.77) .654 = 6 x .109 (16.61) (2.77) .656 (16.66) 1.852 (47.04) 1.308 = 12 x .109 (33.22) (2.77) 1.199 = 11 x .109 (30.45) (2.77) .926 (23.52) 2.500 (63.50) 1.962 = 18 x .109 (49.83) (2.77) 1.853 = 17 x .109 (47.07) (2.77) 1.250 (31.75) 0.112 2 rows 2.406 (61.11) 1.744 = 16 x .109 (44.30) (2.77) 2 rows 1.635 = 15 x .109 (41.35) (2.77) 1 row 1.203 (30.56) 0.00 1 row H I (Dia.) J .125 (3.18) .045 (1.14) .054 (1.37) G PCB Mount .056 (1.42) .109 (2.77) .112 (2.84) PCB Mount Rt Angle .275 (6.99) Panel Cutouts (Front or Rear Mounting) for Standard and High-Density D-Sub Connectors Shell Size 9 (0) 15 (1) 25 (2) 37 (3) 50 (4) A .015 (.38) B .015 (.38) C .015 (.38) D .015 (.38) E .003 (.08) F .005 (.13) G .002 (.05) .984 (24.99) .492 (12.49) .777 (19.74) .388 (9.87) .440 (11.18) .220 (5.59) .150 (3.81) 1.312 (33.32) .656 (16.66) 1.105 (28.07) .552 (14.03) .440 (11.18) .220 (5.59) .150 (3.81) 1.852 (47.04) .926 (23.52) 1.645 (41.78) .822 (20.89) .440 (11.18) .220 (5.59) .150 (3.81) 2.500 (63.50) 1.250 (31.75) 2.293 (58.24) 1.146 (29.12) .440 (11.18) .220 (5.59) .150 (3.81) 2.406 (61.11) 1.203 (30.55) 2.190 (55.63) 1.095 (27.81) .550 (13.97) .275 (6.98) .150 (3.81) .125 Dia. (3.18 Dia.) 2 holes 10 C D E G B F A Front Mounting Panel Rear Mounting Panel Panel Cutouts Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC63 Board & Panel Cutouts 15 High-Density Pin/PCB 15 High-Density Socket/Right Angle .040 (1.02) O 15 holes .040 (1.02) O 15 holes 1 .040 (1.02) O 15 holes .045 (1.14) Connector 26 High-Density Pin/PCB C L .090 (2.29) Typ. .045 (1.14) .090 (2.29) Typ. Connector .045 (1.14) Connector CL CL .010 (.25) 1 .100 (2.54) Typ. Front Face of Connector Flange .010 (.25) 1 .078 (1.98) Typ. .090 (2.29) Typ. .020 (.51) .078 (1.98) Typ. 26 High-Density Socket/PCB 44 High-Density Pin/PCB .040 (1.02) O 44 holes .040 (1.02) O 15 holes .045 (1.14) Connector C L .125 (3.18) O 2 holes .450 (11.43) 44 High-Density Socket/PCB 1 .090 (2.29) Typ. .040 (1.02) O 44 holes .045 (1.14) Connector .045 (1.14) C L C L Connector .020 (.51) .020 (.51) .020 (.51) .090 (2.29) Typ. .090 (2.29) Typ. 1 .078 (1.98) Typ. 62 High-Density Pin/PCB 1 62 High-Density Socket/PCB .040 (1.02) O 62 holes 1 .078 (1.98) Typ. .078 (1.98) Typ. 78 High-Density Socket/PCB .040 (1.02) O Pin/PCB 78 holes .040 (1.02) O 62 holes .095 (2.41) Typ. .0475 (1.21) Connector C L Connector .023 (.58) .095 (2.41) Typ. 1 (Pin/PCB) C L Connector .023 (.58) C L .095 (2.41) Typ. .0475 (1.21) 1 .078 (1.98) Typ. .078 (1.98) Typ. .041 (1.04) 1 (Socket/ PCB) .082 (2.08) Typ. Dimensions in inches (mm) API TECHNOLOGIES * 8061 Avonia Rd. * Fairview, PA 16415 * Ph: 814-474-1571 * Fax: 814-474-3110 * eis.apitech.com API TECHNOLOGIES' SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 FC64